Available Machine # Ez33148 |
- Stock#:Ez33148
- Price:$17,500
- Year:2001
- Region:Midwest
- Condition:Used
| Haas TM-1 CNC Vertical Toolroom Mill with 10 Station Automatic Tool Changer Manufacturer: Haas Model#: TM-1 Toolroom Mill Age: 2001 Spec Control: Haas 32 Bit CNC Control X-Axis Travel: 30" Table Size: 10.5" x 47.75" Y-Axis Travel: 12" Z-Axis Travel: 16" Spindle Taper: Cat 40 Rapid Traverse (X/Y/Z): 200 IPM Table Load: 1,000 Lbs. Spindle Drive: 7.5 HP Spindle Speeds: 0 - 4,000 RPM Equipped With: Haas 32-Bit CNC Control, 10 Station Automatic Tool Changer, Rigid Tapping, 3.5" Floppy Drive, Coolant Tank & Pump, Machine Manuals. Electrics: 208/240 Volt Single or Three Phase Approximate Machine Dimensions: 87.00"L x 62.00"W x 109.00"H Approximate Weight: 3300.00 lbs.
|
         
|
Available Machine # Ez35565 |
- Stock#:Ez35565
- Price:$15,500
- Year:2001
- Region:United States
- Condition:Used
| Spindle Taper: CAT 40 Spindle Speed: 4000 RPM Spindle Motor: 7.5 HP ATC: 10 Weight: 3300 LBS EQUIPPED WITH 10 tool ATC RS 232 Port Coolant System
|
   
|
Available Machine # Ez37877 |
- Stock#:Ez37877
- Price:Call
- Year:2003
- Region:West
- Condition:Used
| $18,000 4,000 RPM Spindle 4th Axis Ready 10 station Tool changer Single block Switch/ Safety Control Floppy Drive Splash Guards Coolant system Levelling Pads
|
         
|
Available Machine # Ez22496 |
- Stock#:Ez22496
- Price:$23,000
- Year:2004
- Region:South
- Condition:Used
| Very nice and under used 2004 Haas TM1 that was recently removed from a plant that closed. Had been used in a racing shop. ONLY 762 Spindle hours. Includes a few tool holders. Can be seen under power by appointment
|
       
|
Available Machine # Ez40149 |
- Stock#:Ez40149
- Price:Call
- Year:2004
- Region:United States
- Condition:Used
|
|
   
|
Available Machine # Ez39603 |
- Stock#:Ez39603
- Price:Call
- Year:2004
- Region:West
- Condition:Used
| Equipped With: Haas Control 10 Position ATC Floppy 4Th Axis Ready
|
   
|
Available Machine # Ez38825 |
- Stock#:Ez38825
- Price:$22,500
- Year:2006
- Region:South
- Condition:Used
| HAAS 32-BIT CNC CONTROL 12" Color LCD Graphic Display 3.5" Floppy Disc Drive 10 Tool Magazine Rigid Tapping Coolant System Green Work Indicator Light Manual / Electronic Handwheels Single or Three Phase Power Tool Shelf Table Chip Guards Chip Pan Extension
|
  
|
Available Machine # Ez34350 |
- Stock#:Ez34350
- Price:$16,500
- Year:2006
- Region:Midwest
- Condition:Used
| HAAS 32-BIT CNC CONTROL W/14" CRT & RS-232 PORT RIGID TAPPING (SYNCHRONOUS / SOLID TAPPING) PARTIALLY ENCLOSED SPLASH & SAFETY GUARDING STANDARD COOLANT SYSTEM WITH TANK & PUMP
|
     
|
