Hundreds of CNC Machines at EZSystems



TypeVertical Machining Centers
Weight38,750 Lbs.
Power164 HP
titleTUSK EX50/FHU135/3300PD-8 FORKLIFT

Zero? Available Machines

Available Machine # Ez16830

  • Stock#:Ez16830
  • Price:$54,900
  • Year:2008
  • Region:Northeast
  • Condition:Used
Machine Model No. EX50 / FHU135 / 3300 PD-8 New Date: Circa March 2008 Manufactured by Komatsu in Japan Rated Capacity: 30,850 Lbs. @ 24" Load Center x 29.5" Distance Hours Showing on Time Meter: 1760.0 Mast Tilting Angle: 6 / 12 Degrees Mast Height, Lowered: 143" Lift Height: 145" Maximum, Free Lift: 0" Height of Roll Cage Guard: 110.6" Length of Fork to Fork Face: 96" Mast Width at Tire: 95" Fork Size: 3-3/4" Thick x 8-3/4" Wide x 96" Long Wheel Base: 122" Axle Loading, Loaded Front: 63,360 Lbs. Axle Loading, Loaded Rear: 6,240 Lbs. Dual Pneumatic Front Tires Each Side Single Pneumatic Rear Tires Each Side Front and Rear Tire Size: 11.00-20-16PR(I) Travel Speed (FWD) Unloaded: 5.9 / 13.0 / 20. 2 MPH Lifting Speed: 64 FPM Loaded / 69 FPM Unloaded Travel Speed (FWD) Loaded: 5.6 / 12.1 / 17.1 MPH Lowering Speed: 79 FPM Loaded / 79 FPM Unloaded Ground Clearance Under Mast: 9.8" Ground Clearance at Center of Wheelbase: 13.8" Turning Radius: 173.2" Distance Across Forks: 21-1/2" Minimum, 85-1/2" Maximum Clutch: Torque Converter Transmission: TORQFLOW Engine Make/Model: KOMATSU SAA6D107E-1, Fuel Type: Diesel Rated Output, SAE Gross: 164 HP @ 2200 RPM Maximum Torque, SAE Gross: 424 @ 1600 Maximum Drawbar Pull: 18,160 Lbs. Maximum Gradeability: 25% Fork Carriage Class: Pin Mount Service Brake: Foot/Hydraulic, Powered Parking Brake: Hand/Mechanical Steering: Hydraulic Power Steering Battery, Voltage/Capacity at 5 Hr. Rating: 24 / 80 Fuel Tank Capacity: 74 Gallons Hydraulic Tank Capacity: 53 Gallons EQUIPPED WITH: Front and Rear Tail Lights and Turn Signals Rear Backup Light and Strobe Light with Signal Horn Adjustable Seat with Seat Belt and Operator Sensor Switch Independent Hydraulic Fork Positioning Each Fork Dual Cylinder Lift Mast with See-Thru Design Foot Operating Pedal for Gas, Brake and Inching Mode Fuel, Temperature and Oil Gages 3-Speed Manual Transmission Mast Attachment Model: FHW135 / FHW1508 / Serial No. 1007 Tag on Mast: Model V150Y840 / Serial No. V37Z005G001 Rear Mounted Pull Bar Operation and Maintenance Manual Tires are in Good Condition Electrical Plugin Battery Tender System for the (2) Batteries Overall Size: Length with Forks: 282" (23'6") x 95" Wide x 143" High x 38,750 Lbs.

Hundreds of CNC Machines at EZSystems
Sales: 714-815-4968
Machines List
3400 W MacArthur Blvd., #E   Santa Ana, CA 92704Copyright 1991-2020